How to Safely Drain Fuel Tank Chevy Silverado in 5 Easy Steps

How to Easily Replace Marker Light on 2015 Chevy Silverado

To change the marker light on a 2015 Chevy Silverado, follow these steps: 1. Locate the marker light assembly.

2. Remove the bolts securing the assembly.

3. Pull the assembly away from the vehicle.

4. Twist the bulb socket counterclockwise and remove it.

5. Replace the bulb with a new one.

6. Insert the bulb socket back into the assembly and twist it clockwise.

7. Reattach the marker light assembly to the vehicle using the bolts.

Step-by-Step Guide: How to Change Marker Light on 2015 Chevy Silverado

If your marker light on your 2015 Chevy Silverado has burnt out or been damaged, you’ll need to replace it. Fortunately, changing the marker light is a relatively simple process that you can do yourself with just a few basic tools and some patience.

Prepare The Necessary Tools

Before you get started, gather the following tools:

  • Flathead screwdriver
  • Wire cutter
  • New marker light

Access The Marker Light Assembly

The marker light assembly is located on the front fender, just above the tire. To access it, follow these steps:

  1. Park your Chevy Silverado on a flat surface and engage the parking brake to ensure stability.
  2. Open the hood of the vehicle.
  3. Locate the marker light assembly on the front fender.

Remove The Old Marker Light

Now that you have access to the marker light assembly, you can proceed with removing the old marker light. Follow these steps:

  1. Use a flathead screwdriver to gently pry open the marker light cover.
  2. Once the cover is removed, locate the wire connector that attaches the old marker light to the vehicle.
  3. Using a wire cutter, carefully disconnect the wire connector by cutting the wires.
  4. Remove the old marker light from the assembly.

Install The New Marker Light

With the old marker light removed, it’s time to install the new one. Follow these steps:

  1. Take the new marker light and position it in the marker light assembly.
  2. Connect the wire connector to the new marker light by aligning the wires and twisting them together.
  3. Ensure that the wire connector is securely attached to the marker light.
  4. Place the marker light cover back onto the assembly and press down firmly until it snaps into place.

Test The New Marker Light

Now that the new marker light is installed, it’s important to test it to ensure it’s working properly. Follow these steps:

  1. Turn on the headlights of your Chevy Silverado.
  2. Check that the marker light is illuminated and functioning correctly.
  3. If the marker light is not working, double-check the wire connection and make any necessary adjustments.

Congratulations! You have successfully changed the marker light on your 2015 Chevy Silverado. Now you can drive with confidence knowing that your vehicle is equipped with a properly functioning marker light.

Tips And Precautions

When it comes to changing the marker light on your 2015 Chevy Silverado, following a few tips and precautions will ensure a smooth and safe process. By disconnecting the battery, using protective gloves and eyewear, and referring to the vehicle manual for specific instructions, you can complete the task without any hassle. Here are the essential steps you need to take:

Disconnect The Battery

Before you start working on replacing the marker light, it is crucial to disconnect the battery. This step is essential to prevent any electrical mishaps or shock during the process. Begin by opening the hood of your Chevy Silverado and locating the battery. Use a wrench or a socket set to loosen the negative (black) terminal by turning it counterclockwise. Once the terminal is loose, gently lift it off the battery post and set it aside. This will ensure that there is no power running through the vehicle while you work on the marker light.

Use Protective Gloves And Eyewear

To keep yourself safe from any potential injuries, it is recommended to wear protective gloves and eyewear. These will safeguard your hands and eyes from any sharp edges or debris that may be encountered while replacing the marker light. Additionally, they will offer protection against any potential chemicals or substances that might come into contact with your skin or eyes. Stay safe and avoid any unnecessary accidents by using the appropriate protective gear.

Follow The Vehicle Manual For Specific Instructions

Every vehicle has its unique specifications and guidelines for changing marker lights. To ensure that you are following the correct procedures, it is essential to consult your 2015 Chevy Silverado’s vehicle manual. The manual will provide you with step-by-step instructions, diagrams, and even safety precautions specific to your vehicle’s make and model. By following these instructions precisely, you can complete the marker light replacement accurately while avoiding any potential errors or damage.

In conclusion, changing the marker light on your 2015 Chevy Silverado requires a few tips and precautions to ensure a successful and safe process. By disconnecting the battery, using protective gloves and eyewear, and following the vehicle manual for specific instructions, you can complete the task confidently. Always remember to prioritize your safety and take the necessary measures to protect yourself from injuries or accidents.


Replacing the marker light on a 2015 Chevy Silverado is a simple task that can be easily done at home. By following the step-by-step instructions provided in this blog post, you can save both time and money. Ensure your safety by disconnecting the battery and taking necessary precautions.

Remember, routine maintenance is essential for keeping your vehicle in top shape. Get started today and enjoy the satisfaction of completing the job yourself.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *